Original file
Volkswagen Lupo Bosch EDC15P+ 0281010049 / 1037350942
An original (stock) flash read of the Bosch EDC15P+ control unit, fitted in Volkswagen Lupo, hardware number 0281010049 and software number 1037350942, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Volkswagen Lupo1.4 diesel 75PS
- Control unit
- Bosch EDC15P+
- Read type
- Full read (boot area included)
- File
- 512.00 KB · Flash
- Hardware number
- 0281010049
- Software number
- 1037350942
- Vehicle maker's hardware number
- 045906019L
Technical data
| Brand | Volkswagen |
|---|---|
| Car model | Lupo |
| Engine | 1.4 diesel 75PS |
| Power | 75.0PS / 55.2kW |
| Control unit | Bosch EDC15P+ |
|---|---|
| ECU maker | Bosch |
| Hardware number | 0281010049 |
| Software number | 1037350942 |
| File type | Original flash read |
|---|---|
| File size | 512.00 KB (524,288 bytes) |
| File key | eee54742f20d960b |
| ECU name | EDC15P+ | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Bosch part / software | 0281010049 / 1037350942 | Offset in the file: 0x05EC25 / 0x010046 |
| Vehicle maker's hardware number | 045906019L | Offset in the file: 0x05EBFA |
| Software / calibration | version 1018 | |
| Engine description | 1,4l R3 EDC | Offset in the file: 0x05EC06 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC15P+ whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 0281010049 and software number 1037350942. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC15P+
| Hardware | Software | Vehicles |
|---|---|---|
| 0281010015 | 1211354603 | Volkswagen lupo 3L 1.2TDI |
| 0281010048 | 1037354204 | Volkswagen Passat 1.9 TDI PD, Volkswagen Passat 2000 Turbodiesel 84.6KWKW |
| 0281010048 | 1037360004 | Volkswagen golf 1.9TDI ARL, Volkswagen Golf 1.9 TDI pd, Volkswagen Golf |
| 0281010049 | Volkswagen Polo 3 | |
| 0281010049 | 1037352592 | Volkswagen Lupo 1.4 TDI, Volkswagen lupo 1.4TDI |
| 0281010091 | 1037350875 | Volkswagen golf 1.9TDI AUY, Volkswagen Golf4 1.9 TDI PD, Volkswagen Golf |
| 0281010094 | 1037354264 | Audi A4 D1900 ATJ R4V2T, Audi A4 |
| 0281010094 | 1037354607 | Audi A4, Audi A4 1.9TDI AJM, Audi A4 1.9 TDI (115) Tiptronic - |