Original file

Volkswagen Polo Turbodiesel 74.3KWKW Bosch EDC15P 0281010671 / 1037351990

An original (stock) flash read of the Bosch EDC15P control unit, fitted in Volkswagen Polo Turbodiesel 74.3KWKW, hardware number 0281010671 and software number 1037351990, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo Turbodiesel 74.3KWKW1.9 diesel · 101.0PS / 74.3kW
Control unit
Bosch EDC15P
Read type
Full read (boot area included)
File
512.00 KB · Flash
Hardware number
0281010671
Software number
1037351990
Vehicle maker's hardware number
038906019AG

Technical data

Vehicle
BrandVolkswagen
Car modelPolo Turbodiesel 74.3KWKW
Engine1.9 diesel
Power101.0PS / 74.3kW
Control unit
Control unitBosch EDC15P
ECU makerBosch
Hardware number0281010671
Software number1037351990
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
From the file nameVW Polo 1.9 TDI Turbodiesel
File key279f58cff45f7ec8
Identification read from the file
ECU nameEDC15P+
Read typeFull read (boot area included)
Bosch part / software0281010671 / 1037351990Offset in the file: 0x05346F / 0x010046
Vehicle maker's hardware number038906019AGOffset in the file: 0x053444
Software / calibrationversion 1506
Engine description1,9l R4 EDCOffset in the file: 0x053450

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC15P whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281010671 and software number 1037351990. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC15P

HardwareSoftwareVehicles
02810106691037362818Audi A4, Audi A4 1.9 TDI pd
02810106701037363738Audi A3 1.9TDI
02810106701037366202Audi A3 2002 Turbodiesel 74.3KWKW
0281010671Škoda Fabia
02810106711037362496Volkswagen Polo
02810106771037362447Volkswagen T4 Bus 2.5 TDI
02810106791037351976Volkswagen Transporter 4
02810106811037362448Volkswagen T4 2.5TDI, Volkswagen Transporter 2.5 TDI

Bosch EDC15P original files

The Bosch EDC15P unit page