Original file
Toyota Dyna Denso89663-25102
An original (stock) flash read of the Denso control unit, fitted in Toyota Dyna, hardware number 89663-25102, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Technical data
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Denso whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 89663-25102. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.
Other pairs of Denso
| Hardware | Software | Vehicles |
|---|---|---|
| 89663-0KF40 | Toyota Hilux | |
| 89663-0KK70-B | Toyota Hilux | |
| 89663-0ZQ71 | Toyota C-HR | |
| 89663-24091 | Lexus | |
| 89663-30151 | Lexus GS430 | |
| 89663-30511 | Lexus GS430 | |
| 89663-33413 | Lexus ES300 3.0L V6 | |
| 89663-33601 | Lexus ES330 3.3L |