Original file

Volkswagen Polo Turbodiesel 74.3KWKW Bosch EDC15P 0281011200 / 1037368183

An original (stock) flash read of the Bosch EDC15P control unit, fitted in Volkswagen Polo Turbodiesel 74.3KWKW, hardware number 0281011200 and software number 1037368183, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo Turbodiesel 74.3KWKW1.9 diesel · 99.9PS / 73.5kW
Control unit
Bosch EDC15P
Read type
Full read (boot area included)
File
512.00 KB · Flash
Hardware number
0281011200
Software number
1037368183
Vehicle maker's hardware number
038906019LC

Technical data

Vehicle
BrandVolkswagen
Car modelPolo Turbodiesel 74.3KWKW
Engine1.9 diesel
Power99.9PS / 73.5kW
Control unit
Control unitBosch EDC15P
ECU makerBosch
Hardware number0281011200
Software number1037368183
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
From the file nameVW Polo 1.9 TDI Turbodiesel
File key83251b1445a24ffe
Identification read from the file
ECU nameEDC15P+
Read typeFull read (boot area included)
Bosch part / software0281011200 / 1037368183Offset in the file: 0x0535C7 / 0x010046
Vehicle maker's hardware number038906019LCOffset in the file: 0x05359C
Software / calibrationversion 5100
Engine description1,9l R4 EDCOffset in the file: 0x0535A8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC15P whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281011200 and software number 1037368183. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC15P

HardwareSoftwareVehicles
02810111981037369959Ford Galaxy 1.9 TDI pd
0281011199Volkswagen Sharan
02810111991037366689Seat alhambra 1.9TDI ASZ, Seat Sharan, Volkswagen
02810111991037369546Volkswagen sharan 1.9TDI ASZ, Volkswagen Sharan 1.9 TDI, Volkswagen Sharan 1.9 TDI pd
02810112011037366297Volkswagen passat 1.9TDI AWX, Volkswagen Passat
028101120303L906023NDVolkswagen Passat KW
02810112031037366299Volkswagen Passat 1.9 TDI PD, Volkswagen Passat 1.9 TDI pd, Volkswagen Passat Turbodiesel 74.3KWKW
02810112041037366500Volkswagen Passat, Volkswagen Passat 1.9TDI PD, Volkswagen Passat 1.9 TDI pd

Bosch EDC15P original files

The Bosch EDC15P unit page