Original file

Mercedes-Benz Sprinter 215 0281 013 Bosch EDC16CP31 0281013810 / 1037400338

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz Sprinter 215 0281 013, hardware number 0281013810 and software number 1037400338, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter 215 0281 013diesel 150CV
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281013810
Software number
1037400338

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter 215 0281 013
Enginediesel 150CV
Displacement2.1
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware number0281013810
Software number1037400338
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameMercedes Sprinter 215 cdi 150CV
File key4467f4a7a73ac690
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software1037400338Offset in the file: 0x180010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281013810 and software number 1037400338. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
02810136691037381147Mercedes-Benz Vito Turbodiesel KW
0281013669QNGA203S016Mercedes-Benz Actros
02810137211037381082Mercedes-Benz Mersedes Benz 2008y E280
02810137881037383371Mercedes-Benz VITO115
02810142011037386794Mercedes-Benz Sprinter 2006 Turbodiesel 95.6KWKW
02810150521037505836Mercedes-Benz sprinter W906 EDC 16CP31
02810150541037391214Mercedes-Benz Sprinter 2.2 CDI
02810153051037505819Mercedes-Benz Sprinter 3.0 CDI V6

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page