Original file

Mercedes-Benz VITO Bosch EDC16C31 CR30-646-C5D4-639-065KW-30-0MEF-02-DAG-001_ME7 / 1037369835

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz VITO, hardware number CR30-646-C5D4-639-065KW-30-0MEF-02-DAG-001_ME7 and software number 1037369835, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz VITOdiesel 90PS
Control unit
Bosch EDC16C31
Read type
Full read (boot area included)
File
1,024.00 KB · Flash
Hardware number
CR30-646-C5D4-639-065KW-30-0MEF-02-DAG-001_ME7
Software number
1037369835

Technical data

Vehicle
BrandMercedes-Benz
Car modelVITO
Enginediesel 90PS
Power90PS / 66.2kW
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCR30-646-C5D4-639-065KW-30-0MEF-02-DAG-001_ME7
Software number1037369835
File
File typeOriginal flash read
File size1,024.00 KB (1,048,576 bytes)
File key472c07cfa2edc6ff
Identification read from the file
Read typeFull read (boot area included)
ProcessorMPC555
Bosch part / software1037369835Offset in the file: 0x020010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR30-646-C5D4-639-065KW-30-0MEF-02-DAG-001_ME7 and software number 1037369835. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C31

HardwareSoftwareVehicles
CR30-646-C5D4-203WM-110kW-EU4OP-ME-1105x0161037376834Mercedes-Benz C 220 2005 Turbodiesel, Mercedes-Benz Vito 220CDI 2005 Turbodiesel
CR30-646-C5D4-203WM-90kW-EU3-ME-3803x0111037369419Mercedes-Benz C, Mercedes-Benz C200
CR30-646-C5D4-203WM-90kW-EU4OP-ME-4803x0121037369843Mercedes-Benz C 200 2003 Turbo
CR30-646-C5D4-639-065KW-30-0MEF-01-DAM-ME0071037371305Mercedes-Benz Vito, Mercedes-Benz VITO109
CR30-646-C5D4-639-065KW-30-0MEF-02-DAG-001_ME71037371337Mercedes-Benz Vito, Mercedes-Benz VITO109
CR30-646-C5D4-639-080KW-30-0AEF-01-DAM-ME0071037371304Mercedes-Benz Vito, Mercedes-Benz Vito 111, Mercedes-Benz VITO111
CR30-646-C5D4-639-080KW-30-0AEF-02-DAG-001_ME71037369834Mercedes-Benz VITO, Mercedes-Benz VITO111
CR30-646-C5D4-639-080KW-30-0AEF-02-DAG-001_ME71037371336Mercedes-Benz Vito, Mercedes-Benz VITO

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page