Original file

Volkswagen Transporter 5 pd R5 Bosch EDC16U31 0281014251 / 1037390622

An original (stock) flash read of the Bosch EDC16U31 control unit, fitted in Volkswagen Transporter 5 pd R5, hardware number 0281014251 and software number 1037390622, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter 5 pd R52.5 diesel · 174.0PS / 128.0kW
Control unit
Bosch EDC16U31
Read type
OBD read (no boot area)
File
512.00 KB · Flash
Hardware number
0281014251
Software number
1037390622
Vehicle maker's hardware number
070906016DR

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter 5 pd R5
Engine2.5 diesel
Power174.0PS / 128.0kW
Control unit
Control unitBosch EDC16U31
ECU makerBosch
Hardware number0281014251
Software number1037390622
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
From the file nameVW Transporter 2.5 TDI pd
File key67512c3aecdd7c03
Identification read from the file
Read typeOBD read (no boot area)
Bosch part / software1037390622Offset in the file: 0x000010
Vehicle maker's hardware number070906016DROffset in the file: 0x040CBA
Software / calibration070906016DR · version 1584Offset in the file: 0x040CCE
Engine descriptionR5 2,5L EDCOffset in the file: 0x040CE0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16U31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281014251 and software number 1037390622. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16U31

HardwareSoftwareVehicles
02810140501037384822Volkswagen T5 2007 , 0
02810141041037384809Seat New Octavia 2005 Turbodiesel
02810141081037384821Mitsubishi Outlander 20DiD
02810141081037390125Mitsubishi outlander 2.0DI D
02810142541037393510Volkswagen T5 BRS DPF
02810142611037393546Audi A6 2.0TDI
0281014261393546Audi A6 2.0TDI
02810142641037389266Chrysler Sebring

Bosch EDC16U31 original files

The Bosch EDC16U31 unit page