Original file

Mercedes-Benz ML Bosch EDC17CP10 0281015954 / 1037396518

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz ML, hardware number 0281015954 and software number 1037396518, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz MLdiesel 155KW
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0281015954
Software number
1037396518
Bosch part / software
1037500252
Software / calibration
6429022800

Technical data

Vehicle
BrandMercedes-Benz
Car modelML
Enginediesel 155KW
Displacement3.0
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number0281015954
Software number1037396518
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keydd1db7d8fb91b8d1
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037500252Offset in the file: 0x02001A
Software / calibration6429022800Offset in the file: 0x183EDA
Bosch project identifier (EPK)46/1/EDC17CP10/1/P568//P_568_56B5__CV091300///Offset in the file: 0x03FB6C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281015954 and software number 1037396518. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
00544638401037396518Mercedes-Benz GL, Mercedes-Benz ML
00544694401037503294Mercedes-Benz VITO122 3.0 V6, Mercedes-Benz Sprinter219/319/419/519
00544694401037510881Mercedes-Benz Sprinter219/319/419/519
02493821601037500230Mercedes-Benz G350
02810163511037397116Mercedes-Benz E 350CDI V6
02810163511037512429Mercedes-Benz W207 E 3.0CDI
02810163831037392553Mercedes-Benz Benz E350 231 BHP
02810163831037397161Mercedes-Benz E350

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page