Original file

Mercedes-Benz A 280 2005 Turbodiesel Bosch EDC16CP31 CR4-642-42P4-211WSM-140KW-PT2R05-DPF-3106X051BME / 1037383655

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz A 280 2005 Turbodiesel, hardware number CR4-642-42P4-211WSM-140KW-PT2R05-DPF-3106X051BME and software number 1037383655, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A 280 2005 Turbodieseldiesel · 180.0PS / 132.4kW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR4-642-42P4-211WSM-140KW-PT2R05-DPF-3106X051BME
Software number
1037383655

Technical data

Vehicle
BrandMercedes-Benz
Car modelA 280 2005 Turbodiesel
Enginediesel
Displacement3.0
Power180.0PS / 132.4kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4-642-42P4-211WSM-140KW-PT2R05-DPF-3106X051BME
Software number1037383655
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameMB 280 CDI 2005 Turbodiesel
File key72e9f20cdf11766b
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037383655Offset in the file: 0x190010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x1906F7

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4-642-42P4-211WSM-140KW-PT2R05-DPF-3106X051BME and software number 1037383655. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz EFlash2,048.00 KB€15Add to cart
Mercedes-Benz EFlash2,048.00 KB€15Add to cart
Mercedes-BenzFlash448.00 KB€15Add to cart

All reads of CR4-642-42P4-211WSM-140KW-PT2R05-DPF-3106X051BME / 1037383655

Other pairs of Bosch EDC16CP31

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page