Original file

Mercedes-Benz Sprinter Bosch EDC16CP31 CR40-64X-70T5-906-065KW-40N-0MEF-01-IAG-002_DPF7_ME9 / 1037386903

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz Sprinter, hardware number CR40-64X-70T5-906-065KW-40N-0MEF-01-IAG-002_DPF7_ME9 and software number 1037386903, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinterdiesel 90PS
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
512.00 KB · Flash
Hardware number
CR40-64X-70T5-906-065KW-40N-0MEF-01-IAG-002_DPF7_ME9
Software number
1037386903

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Enginediesel 90PS
Power90PS / 66.2kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR40-64X-70T5-906-065KW-40N-0MEF-01-IAG-002_DPF7_ME9
Software number1037386903
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
File keybcd807bdb50a263d
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software1037386903Offset in the file: 0x000010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-64X-70T5-906-065KW-40N-0MEF-01-IAG-002_DPF7_ME9 and software number 1037386903. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz Sprinter W906) 309 2200Flash · From the file name: Mercedes Sprinter W906 309 22002,048.00 KB€15Add to cart

All reads of CR40-64X-70T5-906-065KW-40N-0MEF-01-IAG-002_DPF7_ME9 / 1037386903

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR40-64X-46N0-906-115KW-N7-0ANF-01-IAS-003_ME51037398897Mercedes-Benz Sprinter, Mercedes-Benz Sprinter W906) 218 3000
CR40-64X-65T2-906-135KW-40-0MEF-02-ATZ-002_8_DPF_ME11037381134Mercedes-Benz Sprinter, Mercedes-Benz Sprinter W906) 518 3000
CR40-64X-70T5-639-070KW-43P-0MEF-02-IAS-002_ME031037398860Mercedes-Benz Vito, Mercedes-Benz VITO109
CR40-64X-70T5-639-085KW-43P-0MEF-02-RFV-001_ME021037386787Mercedes-Benz Vito
CR40-64X-70T5-906-095KW-40-0MEF-01-IAG-002_DPF7_ME91037386794Mercedes-Benz Sprinter W906) 313 2200, Mercedes-Benz Sprinter
CR40-64X-70T5-906-110KW-43-0MEF-01-IAG-002_DPF7_ME91037386783Mercedes-Benz Sprinter w906 2.2CDI
CR40-64X-70T5-906-135KW-40N-0MEF-02-IAS-003_DPF12_ME51037393839Mercedes-Benz Sprinter
CR40-64X-75T0-906-095KW-40N-0MEF-03-IAS-001_DPF7_ME151037505813Mercedes-Benz Sprinter W906) 313 2200

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page