Original file

Land Rover discovery 2017y Bosch MEDC17.9 0281033584 / 10SW011031

An original (stock) flash read of the Bosch MEDC17.9 control unit, fitted in Land Rover discovery 2017y, hardware number 0281033584 and software number 10SW011031, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover discovery 2017y
Control unit
Bosch MEDC17.9
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
0281033584
Software number
10SW011031
Bosch part / software
10SW028779
Software / calibration
GX73-12B684-FAB

Technical data

Vehicle
BrandLand Rover
Car modeldiscovery 2017y
Control unit
Control unitBosch MEDC17.9
ECU makerBosch
Hardware number0281033584
Software number10SW011031
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameLandrover discovery 2017y
File key58d675ffe38f33da
Identification read from the file
ECU nameMEDC17.9
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW028779Offset in the file: 0x02001A
Software / calibrationGX73-12B684-FABOffset in the file: 0x00FD00
Engine descriptionHX73-14C204-FJCOffset in the file: 0x1FFF02
Bosch project identifier (EPK)47/1/MEDC17_9/190/P1226//P1226C246_3_20_CONT///Offset in the file: 0x043464

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEDC17.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281033584 and software number 10SW011031. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEDC17.9

HardwareSoftwareVehicles
026017122610SW026017Land Rover Discovery Sport, Land Rover Discovery
026022122610SW023191Land Rover Range Rover Evoque, Land Rover Range Rover
026026122610SW023191Land Rover Discovery Sport, Land Rover Discovery
GJ32-12K532-FBE10SW006071Land Rover Range Rover Evoque
GJ32-12K532-FBF10SW011420Land Rover Range Rover Evoque
GJ32-12K532-FBH10SW032745Land Rover Range Rover Evoque
GJ32-12K532-GCD10SW004598Land Rover Range Rover Evoque
GJ32-12K532-GCK10SW040154Land Rover

Bosch MEDC17.9 original files

The Bosch MEDC17.9 unit page