Original file
Jaguar F-Type Bosch MED17.8.31 GX53-14C204-TTC / 1037539380
An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Jaguar F-Type, hardware number GX53-14C204-TTC and software number 1037539380, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Jaguar F-Type3.0 diesel 340PS
- Control unit
- Bosch MED17.8.31
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- GX53-14C204-TTC
- Software number
- 1037539380
- Bosch part / software
- 1037552067
- Software / calibration
- GX53-12B684-AA
Technical data
| Brand | Jaguar |
|---|---|
| Car model | F-Type |
| Engine | 3.0 diesel 340PS |
| Power | 340.0PS / 250.1kW |
| Control unit | Bosch MED17.8.31 |
|---|---|
| ECU maker | Bosch |
| Hardware number | GX53-14C204-TTC |
| Software number | 1037539380 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | d48a70a4c582cd3a |
| ECU name | MED17.8.3 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 1037552067 | Offset in the file: 0x04001A |
| Software / calibration | GX53-12B684-AA | Offset in the file: 0x00FD00 |
| Engine description | GX53-14C204-TTC | Offset in the file: 0x1C66A0 |
| Internal build string | MED1783_PBL_054_10.500 | Offset in the file: 0x00FA58 |
| Bosch project identifier (EPK) | 39/1/MED17/54///D1783_126V6_SCM_0812/// | Offset in the file: 0x17FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number GX53-14C204-TTC and software number 1037539380. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.8.31
| Hardware | Software | Vehicles |
|---|---|---|
| GX53-14C204-BTF | 10SW025479 | Jaguar F-Type |
| GX53-14C204-CTC | 1037539380 | Jaguar F-Type |
| GX53-14C204-ETD | 1037538234 | Jaguar F-Type |
| GX53-14C204-ETF | 1037538234 | Jaguar F-Type |
| GX53-14C204-TTD | 1037539380 | Jaguar F-Type |
| GX53-14C204-TTE | 1037539380 | Jaguar F-Type |
| GX53-14C204-UTE | 1037539380 | Jaguar F-Type, Jaguar F-Type / S / Project 7 |
| GX63-14C204-JTD | 1037538234 | Jaguar XF |