Original file

Jaguar XF Bosch MED17.8.31 GX63-14C204-JTD / 1037538234

An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Jaguar XF, hardware number GX63-14C204-JTD and software number 1037538234, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XF3.0 petrol 340PS
Control unit
Bosch MED17.8.31
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
GX63-14C204-JTD
Software number
1037538234
Bosch part / software
10SW013832
Software / calibration
CPLA-12B684-YE

Technical data

Vehicle
BrandJaguar
Car modelXF
Engine3.0 petrol 340PS
Power340.0PS / 250.1kW
Control unit
Control unitBosch MED17.8.31
ECU makerBosch
Hardware numberGX63-14C204-JTD
Software number1037538234
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2a0351544714d609
Identification read from the file
ECU nameMED17.8.3
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW013832Offset in the file: 0x04001A
Software / calibrationCPLA-12B684-YEOffset in the file: 0x00FD00
Engine descriptionGX63-14C204-JTDOffset in the file: 0x1C6D14
Internal build stringMED1783_PBL_054_10.500Offset in the file: 0x00FA58
Bosch project identifier (EPK)39/1/MED17/54///D1783_126V6_SCM_0852///Offset in the file: 0x17FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GX63-14C204-JTD and software number 1037538234. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.31

HardwareSoftwareVehicles
GX53-14C204-TTC1037539380Jaguar F-Type
GX53-14C204-TTD1037539380Jaguar F-Type
GX53-14C204-TTE1037539380Jaguar F-Type
GX53-14C204-UTE1037539380Jaguar F-Type, Jaguar F-Type / S / Project 7
GX73-14C204-TTC1037538234Jaguar Xe
GX73-14C204-TTD1037538234Jaguar F-Type
GX73-14C204-TTF1037538234Jaguar XE S
HK83-14C204-CTD10SW013840Jaguar F Pace 2017y 3.0L

Bosch MED17.8.31 original files

The Bosch MED17.8.31 unit page