Original file

Land Rover Discovery Bosch MEDC17.9 GX73-12B684-FA2 / GX73-12B684-FA2

An original (stock) flash read of the Bosch MEDC17.9 control unit, fitted in Land Rover Discovery, hardware number GX73-12B684-FA2 and software number GX73-12B684-FA2, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Discovery150PS
Control unit
Bosch MEDC17.9
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
GX73-12B684-FA2
Software number
GX73-12B684-FA2

Technical data

Vehicle
BrandLand Rover
Car modelDiscovery
Engine150PS
FuelDiesel
Displacement2.0
Power150.0PS / 110.3kW
Control unit
Control unitBosch MEDC17.9
ECU makerBosch
Hardware numberGX73-12B684-FA2
Software numberGX73-12B684-FA2
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8aa485f064d78bb1
Identification read from the file
ECU nameMEDC17.9
Read typeFull read (boot area included)
ProcessorTC1793
Software / calibrationGX73-12B684-FA2Offset in the file: 0x00BD00
Engine descriptionGX73-14C204-FA4Offset in the file: 0x1FBF02
Internal build string190_PBL_1.1.1Offset in the file: 0x00BA5A
Bosch project identifier (EPK)43/1/MEDC17_9/190/P1226//P1226C080B_3_20///Offset in the file: 0x03F8D8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEDC17.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GX73-12B684-FA2 and software number GX73-12B684-FA2. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEDC17.9

HardwareSoftwareVehicles
GX63-12K532-FHCGX63-12K532-FHCJaguar XF
GX63-12K532-FKE10SW023620Jaguar XF
GX63-12K532-FLCGX63-12K532-FLCJaguar XF PROTEAM ENGINEERING
GX63-12K532-SADGX63-12K532-SADJaguar XF
GX73-12B684-FAB006619Jaguar F pace
GX73-12B684-FAB1037553535Jaguar XE
GX73-12B684-FAB1037555790Land Rover Evoque scr egr
GX73-12B684-FAB10SW000058Land Rover Range Rover Evoque, Land Rover Discovery, Land Rover XF

Bosch MEDC17.9 original files

The Bosch MEDC17.9 unit page