Original file

Land Rover Discovery Bosch MEDC17.9 GX73-12B684-FAB / HK72-12K532-GTF

An original (stock) flash read of the Bosch MEDC17.9 control unit, fitted in Land Rover Discovery, hardware number GX73-12B684-FAB and software number HK72-12K532-GTF, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Discovery2.0 diesel · 150.0PS / 110.3kW
Control unit
Bosch MEDC17.9
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
GX73-12B684-FAB
Software number
HK72-12K532-GTF
Bosch part / software
10SW028779

Technical data

Vehicle
BrandLand Rover
Car modelDiscovery
Engine2.0 diesel
Power150.0PS / 110.3kW
Control unit
Control unitBosch MEDC17.9
ECU makerBosch
Hardware numberGX73-12B684-FAB
Software numberHK72-12K532-GTF
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye5f2b94dafbb3fe7
Identification read from the file
ECU nameMEDC17.9
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW028779Offset in the file: 0x02001A
Software / calibrationGX73-12B684-FABOffset in the file: 0x00FD00
Engine descriptionHX73-14C204-FJCOffset in the file: 0x1FFF02
Bosch project identifier (EPK)47/1/MEDC17_9/190/P1226//P1226C246_3_20_CONT///Offset in the file: 0x043464

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEDC17.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GX73-12B684-FAB and software number HK72-12K532-GTF. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Land Rover DiscoveryFlash4,096.00 KB€15Add to cart
Land Rover DiscoveryFlash4,096.00 KB€15Add to cart
Land Rover DiscoveryFlash4,096.00 KB€15Add to cart
Land Rover DiscoveryFlash4,096.00 KB€15Add to cart
Land Rover DiscoveryFlash4,096.00 KB€15Add to cart
Land Rover DiscoveryFlash4,096.00 KB€15Add to cart

All reads of GX73-12B684-FAB / HK72-12K532-GTF

Other pairs of Bosch MEDC17.9

HardwareSoftwareVehicles
GX73-12B684-FABGX73-14C204-FAELand Rover Range Rover Evoque
GX73-12B684-FABGX73-14C204-FAFJaguar XE, Jaguar F-Pace
GX73-12B684-FABGX73-14C204-FAHLand Rover Range Rover Evoque, Land Rover XF, Land Rover Discovery
GX73-12B684-FABHJ32-12K532-GLFLand Rover Range Rover Evoque
GX73-12B684-FABHX73-14C204-FFELand Rover Range Rover Evoque, Land Rover E-Pace, Jaguar
GX73-12B684-FABHX73-14C204-FJCLand Rover Range Rover Evoque, Land Rover Discovery
GX73-12B684-FABJ9C3-12K532-KDEJaguar E-Pace
GX73-12B684-FBB10SW010927Jaguar F-Pace, Jaguar XF

Bosch MEDC17.9 original files

The Bosch MEDC17.9 unit page