Original file

Jaguar XF Bosch MEDC17.9 GX73-12K532-FLE / 10SW023583

An original (stock) flash read of the Bosch MEDC17.9 control unit, fitted in Jaguar XF, hardware number GX73-12K532-FLE and software number 10SW023583, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XF2.0 diesel 163PS
Control unit
Bosch MEDC17.9
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
GX73-12K532-FLE
Software number
10SW023583

Technical data

Vehicle
BrandJaguar
Car modelXF
Engine2.0 diesel 163PS
Power163PS / 119.9kW
Control unit
Control unitBosch MEDC17.9
ECU makerBosch
Hardware numberGX73-12K532-FLE
Software number10SW023583
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8be5c66b33e038d4
Identification read from the file
ECU nameMEDC17.9
Read typeCalibration only (data set)
Bosch part / software10SW023583Offset in the file: 0x22001A
Bosch project identifier (EPK)42/1/MEDC17_9/190/P1226//P1226C085_3_20///Offset in the file: 0x220078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEDC17.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GX73-12K532-FLE and software number 10SW023583. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEDC17.9

Bosch MEDC17.9 original files

The Bosch MEDC17.9 unit page