Original file

BMW F20 Bosch EDC17C50 0281019683 / N47D16K1-F20N47D16K1_2W5M

An original (stock) flash read of the Bosch EDC17C50 control unit, fitted in BMW F20, hardware number 0281019683 and software number N47D16K1-F20N47D16K1_2W5M, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandBMW
Car modelF20
Engine1.6 145HP
Fueldiesel
Displacement1.6
Power145HP
Control unit
Control unitBosch EDC17C50
ECU makerBosch
Hardware number0281019683
Software numberN47D16K1-F20N47D16K1_2W5M
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key43c1fc9494a76792
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C50 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281019683 and software number N47D16K1-F20N47D16K1_2W5M. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Bosch EDC17C50

Bosch EDC17C50 original files

The Bosch EDC17C50 unit page