Original file

BMW 3 Serie - Sedan Bosch EDC17C50 0281019808 / N47D20O1-F30N47OL_ED_MT

An original (stock) flash read of the Bosch EDC17C50 control unit, fitted in BMW 3 Serie - Sedan, hardware number 0281019808 and software number N47D20O1-F30N47OL_ED_MT, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - SedanN47D20 · 163.0PS / 119.9kW
Control unit
Bosch EDC17C50
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281019808
Software number
N47D20O1-F30N47OL_ED_MT

Technical data

Vehicle
BrandBMW
Car model3 Serie - Sedan
EngineN47D20
FuelDiesel
Displacement2.0
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17C50
ECU makerBosch
Hardware number0281019808
Software numberN47D20O1-F30N47OL_ED_MT
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5d5f0baf71d60b45
Identification read from the file
ECU nameEDC17C56
Read typeCalibration only (data set)
Data set descriptionN47D20O1-F30N47OL_ED_MT
Bosch project identifier (EPK)32/1/EDC17_C56/11/P_735//VDUW///Offset in the file: 0x1012A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C50 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281019808 and software number N47D20O1-F30N47OL_ED_MT. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C50

Bosch EDC17C50 original files

The Bosch EDC17C50 unit page