Original file

BMW 3.0D Bosch EDC17C41 O_7FDM-0000278D-198 / N57D30O1-F25N57O1_BEL_713

An original (stock) flash read of the Bosch EDC17C41 control unit, fitted in BMW 3.0D, hardware number O_7FDM-0000278D-198 and software number N57D30O1-F25N57O1_BEL_713, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3.0D3.0 diesel 211PS
Control unit
Bosch EDC17C41
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
O_7FDM-0000278D-198
Software number
N57D30O1-F25N57O1_BEL_713

Technical data

Vehicle
BrandBMW
Car model3.0D
Engine3.0 diesel 211PS
Power211PS / 155.2kW
Control unit
Control unitBosch EDC17C41
ECU makerBosch
Hardware numberO_7FDM-0000278D-198
Software numberN57D30O1-F25N57O1_BEL_713
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyf3b404c005e99123
Identification read from the file
ECU nameEDC17C41
Read typeCalibration only (data set)
Data set descriptionN57D30O1-F25N57O1_BEL_713
Bosch project identifier (EPK)32/1/EDC17_C41/11/P_735//VFDM///Offset in the file: 0x3012A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C41 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_7FDM-0000278D-198 and software number N57D30O1-F25N57O1_BEL_713. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C41

Bosch EDC17C41 original files

The Bosch EDC17C41 unit page