Original file

Volkswagen Bosch EDC17C46 03L907309AE / 10SW100054

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Volkswagen, hardware number 03L907309AE and software number 10SW100054, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L907309AE
Software number
10SW100054
Software / calibration
03L906018DC

Technical data

Vehicle
BrandVolkswagen
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L907309AE
Software number10SW100054
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4f6c1b30382b14d2
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software10SW100054Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309AEOffset in the file: 0x053A50
Software / calibration03L906018DC · version 9981Offset in the file: 0x053A6A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)035/1/EDC17_C46/5/P643//C643DX5WQ//Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L907309AE and software number 10SW100054. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page