Original file

BMW 5er Bosch EDC17C50 O_7FTL0-00001744-002 / N47D20O1-F10N47UL_EU6_MT

An original (stock) flash read of the Bosch EDC17C50 control unit, fitted in BMW 5er, hardware number O_7FTL0-00001744-002 and software number N47D20O1-F10N47UL_EU6_MT, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5er2.0 diesel 150PS
Control unit
Bosch EDC17C50
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
O_7FTL0-00001744-002
Software number
N47D20O1-F10N47UL_EU6_MT

Technical data

Vehicle
BrandBMW
Car model5er
Engine2.0 diesel 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC17C50
ECU makerBosch
Hardware numberO_7FTL0-00001744-002
Software numberN47D20O1-F10N47UL_EU6_MT
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc19f5e961e0927f6
Identification read from the file
ECU nameEDC17C50
Read typeFull read (boot area included)
Data set descriptionN47D20O1-F10N47UL_EU6_MT
Bosch project identifier (EPK)37/1/EDC17_C50_C56/11/P_735//VFTL0///Offset in the file: 0x25973C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C50 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_7FTL0-00001744-002 and software number N47D20O1-F10N47UL_EU6_MT. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C50

Bosch EDC17C50 original files

The Bosch EDC17C50 unit page