Original file

BMW X5 SUV Bosch EDC17C50 O_7FU50-000058D7-010 / N57D30O1-F15N57O1_4WW_B

An original (stock) flash read of the Bosch EDC17C50 control unit, fitted in BMW X5 SUV, hardware number O_7FU50-000058D7-010 and software number N57D30O1-F15N57O1_4WW_B, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X5 SUVN57D30 · 211PS / 155.2kW
Control unit
Bosch EDC17C50
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
O_7FU50-000058D7-010
Software number
N57D30O1-F15N57O1_4WW_B

Technical data

Vehicle
BrandBMW
Car modelX5 SUV
EngineN57D30
FuelDiesel
Displacement3.0
Power211PS / 155.2kW
Control unit
Control unitBosch EDC17C50
ECU makerBosch
Hardware numberO_7FU50-000058D7-010
Software numberN57D30O1-F15N57O1_4WW_B
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye5af1786b03bafe5
Identification read from the file
ECU nameEDC17C50
Read typeCalibration only (data set)
Data set descriptionN57D30O1-F15N57O1_4WW_B
Bosch project identifier (EPK)37/1/EDC17_C50_C56/11/P_735//VFU50///Offset in the file: 0x1012A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C50 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_7FU50-000058D7-010 and software number N57D30O1-F15N57O1_4WW_B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C50

Bosch EDC17C50 original files

The Bosch EDC17C50 unit page