Original file

BMW 3er Bosch EDC17C50 O_7FZN1-0000146D-056 / N47D20O1-F30N47O1_US_AWD

An original (stock) flash read of the Bosch EDC17C50 control unit, fitted in BMW 3er, hardware number O_7FZN1-0000146D-056 and software number N47D20O1-F30N47O1_US_AWD, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3er2.0 diesel 184PS
Control unit
Bosch EDC17C50
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
O_7FZN1-0000146D-056
Software number
N47D20O1-F30N47O1_US_AWD

Technical data

Vehicle
BrandBMW
Car model3er
Engine2.0 diesel 184PS
Power184PS / 135.3kW
Control unit
Control unitBosch EDC17C50
ECU makerBosch
Hardware numberO_7FZN1-0000146D-056
Software numberN47D20O1-F30N47O1_US_AWD
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye4484fc1a3548cd2
Identification read from the file
ECU nameEDC17C50
Read typeFull read (boot area included)
Data set descriptionN47D20O1-F30N47O1_US_AWD
Bosch project identifier (EPK)37/1/EDC17_C50_C56/11/P_735//VFZN1///Offset in the file: 0x3012A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C50 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_7FZN1-0000146D-056 and software number N47D20O1-F30N47O1_US_AWD. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C50

Bosch EDC17C50 original files

The Bosch EDC17C50 unit page