Original file

BMW 3 Serie - Sedan Bosch EDC17C56 O_ASP / N47D20K1-F30N47K1_EU5_AT

An original (stock) flash read of the Bosch EDC17C56 control unit, fitted in BMW 3 Serie - Sedan, hardware number O_ASP and software number N47D20K1-F30N47K1_EU5_AT, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - Sedan2.0 diesel 115PS
Control unit
Bosch EDC17C56
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
O_ASP
Software number
N47D20K1-F30N47K1_EU5_AT

Technical data

Vehicle
BrandBMW
Car model3 Serie - Sedan
Engine2.0 diesel 115PS
Power115.6PS / 85.0kW
Control unit
Control unitBosch EDC17C56
ECU makerBosch
Hardware numberO_ASP
Software numberN47D20K1-F30N47K1_EU5_AT
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb96348076eabe92f
Identification read from the file
ECU nameEDC17C56
Read typeFull read (boot area included)
Data set descriptionN47D20K1-F30N47K1_EU5_AT
Bosch project identifier (EPK)32/1/EDC17_C56/11/P_735//VDUU///Offset in the file: 0x3012A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C56 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_ASP and software number N47D20K1-F30N47K1_EU5_AT. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C56

Bosch EDC17C56 original files

The Bosch EDC17C56 unit page