Original file

Mercedes-Benz V Bosch EDC17C66 0281019986 / 1037544321

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz V, hardware number 0281019986 and software number 1037544321, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vdiesel 140KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281019986
Software number
1037544321
Software / calibration
6519020202

Technical data

Vehicle
BrandMercedes-Benz
Car modelV
Enginediesel 140KW
Displacement2.1
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0281019986
Software number1037544321
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7ac6aa1cdaab40e3
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software1037544321Offset in the file: 0x02001A
Software / calibration6519020202Offset in the file: 0x08471F
Data set number6519038830Offset in the file: 0x08472A
Boot software6519041000Offset in the file: 0x084714
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FDS3__CV141100///Offset in the file: 0x020C80

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281019986 and software number 1037544321. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
02651903601037540848Mercedes-Benz vito 114cdi
027621126210SW027621126246R0Mercedes-Benz C180 d
027623126210SW027623126246R0Mercedes-Benz C200d
027632126210SW027632126246R0Mercedes-Benz C200d
02810301921037533497Mercedes-Benz C180 CDI, Mercedes-Benz C180d
02810301921037554157Mercedes-Benz C200
02810301921037554733Mercedes-Benz C200
028103019210SW009984Mercedes-Benz C180

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page