Original file

Mercedes-Benz Vito 114 Bosch EDC17C66 0281031244 / 10SW004632

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito 114, hardware number 0281031244 and software number 10SW004632, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito 1142.2 diesel 100KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281031244
Software number
10SW004632
Software / calibration
6519021802

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito 114
Engine2.2 diesel 100KW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0281031244
Software number10SW004632
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyff8f46bd24c9e1c8
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW004632Offset in the file: 0x02001A
Software / calibration6519021802Offset in the file: 0x0850C7
Data set number6519034539Offset in the file: 0x0850D2
Boot software6519041400Offset in the file: 0x0850BC
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FGS1__CV150900///Offset in the file: 0x020C80

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031244 and software number 10SW004632. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
028103019210SW009984Mercedes-Benz C180
028103019210SW009985Mercedes-Benz C180D
02810312441037540848Mercedes-Benz V250, Mercedes-Benz Viano, Mercedes-Benz Vito
02810312441037555863Mercedes-Benz Vito
028103124410SW010200Mercedes-Benz Vito
028103124410SW010205Mercedes-Benz V 220CDI
028103124410SW012290Mercedes-Benz Vito
028103124410SW022233Mercedes-Benz V-220CDI

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page