Original file

Mercedes-Benz V-220CDI Bosch EDC17C66 0281031244 / 10SW022233

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz V-220CDI, hardware number 0281031244 and software number 10SW022233, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz V-220CDI2.2 diesel 120KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281031244
Software number
10SW022233
Software / calibration
6519021802

Technical data

Vehicle
BrandMercedes-Benz
Car modelV-220CDI
Engine2.2 diesel 120KW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0281031244
Software number10SW022233
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keybf373b4585507c3e
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW022233Offset in the file: 0x02001A
Software / calibration6519021802Offset in the file: 0x0850C7
Data set number6519036050Offset in the file: 0x0850D2
Boot software6519041400Offset in the file: 0x0850BC
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FGS1__CV150900///Offset in the file: 0x020C80

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031244 and software number 10SW022233. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
028103124410SW004632Mercedes-Benz Vito 114
028103124410SW010200Mercedes-Benz Vito
028103124410SW010205Mercedes-Benz V 220CDI
028103124410SW012290Mercedes-Benz Vito
02810313261037541778Mercedes-Benz Vito
02810313261037554966Mercedes-Benz Vito
04180312621037541778Mercedes-Benz Vito
041804126210SW041804126266V1Mercedes-Benz Vito

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page