Original file

Ford Bosch EDC17C70 L1B1-14C204-ME / 10SW093531

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford, hardware number L1B1-14C204-ME and software number 10SW093531, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford5.5
Control unit
Bosch EDC17C70
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
L1B1-14C204-ME
Software number
10SW093531

Technical data

Vehicle
BrandFord
Engine5.5
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberL1B1-14C204-ME
Software number10SW093531
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key687fd872e6afa397
Identification read from the file
ECU nameEDC17C70
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW093531Offset in the file: 0x00001A
Software / calibrationL1B1-14C204-MEOffset in the file: 0x196379
Bosch project identifier (EPK)37/1/EDC17C70/57/P1485F//P1485F520///Offset in the file: 0x080130

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number L1B1-14C204-ME and software number 10SW093531. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page