Original file

BMW X5 Bosch EDC17C76 O_7UAC0-00002972-019 / N57D30O1-F15N57O1_US_NTAGR

An original (stock) flash read of the Bosch EDC17C76 control unit, fitted in BMW X5, hardware number O_7UAC0-00002972-019 and software number N57D30O1-F15N57O1_US_NTAGR, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X5258PS
Control unit
Bosch EDC17C76
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
O_7UAC0-00002972-019
Software number
N57D30O1-F15N57O1_US_NTAGR

Technical data

Vehicle
BrandBMW
Car modelX5
Engine258PS
FuelDiesel
Displacement3.0
Power258PS / 189.8kW
Control unit
Control unitBosch EDC17C76
ECU makerBosch
Hardware numberO_7UAC0-00002972-019
Software numberN57D30O1-F15N57O1_US_NTAGR
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye7debe276891e5f9
Identification read from the file
ECU nameEDC17C76
Read typeCalibration only (data set)
Data set descriptionN57D30O1-F15N57O1_US_NTAGR
Bosch project identifier (EPK)34/1/EDC17_C76/11/P_1371//VUAC0///Offset in the file: 0x3012A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C76 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_7UAC0-00002972-019 and software number N57D30O1-F15N57O1_US_NTAGR. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C76

Bosch EDC17C76 original files

The Bosch EDC17C76 unit page