Original file

Ford F650 Bosch EDC17C10 GC4A-14C558-AA / 1037556639

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford F650, hardware number GC4A-14C558-AA and software number 1037556639, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford F6506.7 330PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
GC4A-14C558-AA
Software number
1037556639
Bosch part / software
10SW037021
Vehicle maker's hardware number
CV6Q-12A650-AA
Software / calibration
GC4A-12B684-AZA

Technical data

Vehicle
BrandFord
Car modelF650
Engine6.7 330PS
Power330PS / 242.7kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberGC4A-14C558-AA
Software number1037556639
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key84fb978e2a6f0a31
Identification read from the file
ECU nameEDC17CP05
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW037021Offset in the file: 0x02001A
Vehicle maker's hardware numberCV6Q-12A650-AAOffset in the file: 0x35F699
Software / calibrationGC4A-12B684-AZAOffset in the file: 0x00FD00
Engine descriptionGC4A-14C204-BYGOffset in the file: 0x27FF4B
Bosch project identifier (EPK)41/1/EDC17CP05/57/P1323//P1323_C6_1240///Offset in the file: 0x042254

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GC4A-14C558-AA and software number 1037556639. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page