Original file
Land Rover Range Rover Evoque Bosch MEDC17.9 K8D2-12K532-FBJ / K8D2-12K532-FBJ
An original (stock) flash read of the Bosch MEDC17.9 control unit, fitted in Land Rover Range Rover Evoque, hardware number K8D2-12K532-FBJ and software number K8D2-12K532-FBJ, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Land Rover Range Rover Evoque2.0 · 180PS / 132.4kW
- Control unit
- Bosch MEDC17.9
- Read type
- Full read (boot area included)
- File
- 2,048.00 KB · Flash
- Hardware number
- K8D2-12K532-FBJ
- Software number
- K8D2-12K532-FBJ
- Bosch part / software
- 10SW052820
Technical data
| Brand | Land Rover |
|---|---|
| Car model | Range Rover Evoque |
| Engine | 2.0 |
| Fuel | Diesel |
| Power | 180PS / 132.4kW |
| Control unit | Bosch MEDC17.9 |
|---|---|
| ECU maker | Bosch |
| Hardware number | K8D2-12K532-FBJ |
| Software number | K8D2-12K532-FBJ |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | dc49c7f57d6818b6 |
| ECU name | MEDC17.9 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Bosch part / software | 10SW052820 | Offset in the file: 0x02001A |
| Bosch project identifier (EPK) | 50/1/MEDC17_9/190/P1226//P1226C481_FR_MHEV_3_60/// | Offset in the file: 0x0C0130 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEDC17.9 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number K8D2-12K532-FBJ and software number K8D2-12K532-FBJ. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEDC17.9
| Hardware | Software | Vehicles |
|---|---|---|
| JX63-12K532-FDE | 10SW043672 | Jaguar XF |
| JX73-12K532-FAE | 10SW043541 | Jaguar XE |
| JY32-12K532-FAD | 10SW044778 | Rover |
| K8D2-12K532-FAT | 10SW079544 | Rover |
| K8D2-12K532-FBL | 10SW057322 | Land Rover Range Rover Evoque |
| K8D2-12K532-FCF | 10SW046697 | Land Rover Range Rover Evoque |
| K9C3-12K532-FAC | 10SW039969 | |
| K9C3-12K532-FCD | C475_M_20_19_X540_TT_4AS_ES_20D4_MPP_SS6S_18_FS1019 | Jaguar E-Pace 2.0 D |