Original file

Audi A4 8K Bosch EDC17CP44 8K0907401E / 1037505901

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A4 8K, hardware number 8K0907401E and software number 1037505901, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A4 8K3.0 diesel
Control unit
Bosch EDC17CP44
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
8K0907401E
Software number
1037505901
Bosch part / software
10SW056235
Software / calibration
8K5997401C

Technical data

Vehicle
BrandAudi
Car modelA4 8K
Engine3.0 diesel
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number8K0907401E
Software number1037505901
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc95d83235ce4d422
Identification read from the file
ECU nameEDC17CP24
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software10SW056235Offset in the file: 0x04001A
Vehicle maker's hardware number8K0907401EOffset in the file: 0x1B18A2
Software / calibration8K5997401C · version 0003Offset in the file: 0x1B18BC
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)36/1/EDC17_CP24/5/P703//C703B3WPH///Offset in the file: 0x05AEFC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K0907401E and software number 1037505901. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
7P5997401B10SW056549Volkswagen Touareg
7P5997401B10SW056549 1071B0CMPorsche Cayenne Diesel 3.0 TDI V6
7P5997401B4G0907401Porsche Cayenne Diesel, Porsche 958
7P5997401B7P5997401BPorsche Cayenne Diesel
8K0907401E1037507647Audi A4 3.0 TDI, Audi A4 3.0 TDI CR
8K0907401E1037515240Audi A4, Audi pcmflash
8K0907401E10SW056235Audi A4, Audi A6
8K59073111037519312Audi A5

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page