Original file

BMW F30 Bosch EDC17CP45 O_7BUB-00000C5C-046 / N57D30T1-F10N57T1_AWD_EU5

An original (stock) flash read of the Bosch EDC17CP45 control unit, fitted in BMW F30, hardware number O_7BUB-00000C5C-046 and software number N57D30T1-F10N57T1_AWD_EU5, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F303.0 360HP
Control unit
Bosch EDC17CP45
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
O_7BUB-00000C5C-046
Software number
N57D30T1-F10N57T1_AWD_EU5

Technical data

Vehicle
BrandBMW
Car modelF30
Engine3.0 360HP
FuelDiesel
Control unit
Control unitBosch EDC17CP45
ECU makerBosch
Hardware numberO_7BUB-00000C5C-046
Software numberN57D30T1-F10N57T1_AWD_EU5
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7ee8d64599c3a9c3
Identification read from the file
ECU nameEDC17CP45
Read typeCalibration only (data set)
Data set descriptionN57D30T1-F10N57T1_AWD_EU5
Bosch project identifier (EPK)33/1/EDC17_CP45/11/P_731//VBUB///Offset in the file: 0x100B98

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP45 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_7BUB-00000C5C-046 and software number N57D30T1-F10N57T1_AWD_EU5. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP45

Bosch EDC17CP45 original files

The Bosch EDC17CP45 unit page