Original file

BMW Bosch EDC17CP45 O_7BWG-00001190-044 / N57D30T1-F01N57T1_AWD_EU5

An original (stock) flash read of the Bosch EDC17CP45 control unit, fitted in BMW, hardware number O_7BWG-00001190-044 and software number N57D30T1-F01N57T1_AWD_EU5, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMWN57D30
Control unit
Bosch EDC17CP45
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
O_7BWG-00001190-044
Software number
N57D30T1-F01N57T1_AWD_EU5

Technical data

Vehicle
BrandBMW
EngineN57D30
FuelDiesel
Displacement3.0
Control unit
Control unitBosch EDC17CP45
ECU makerBosch
Hardware numberO_7BWG-00001190-044
Software numberN57D30T1-F01N57T1_AWD_EU5
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keydfb6415f9b158ba3
Identification read from the file
ECU nameEDC17CP45
Read typeFull read (boot area included)
Data set descriptionN57D30T1-F01N57T1_AWD_EU5
Bosch project identifier (EPK)33/1/EDC17_CP45/11/P_731//VBWG///Offset in the file: 0x25B568

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP45 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_7BWG-00001190-044 and software number N57D30T1-F01N57T1_AWD_EU5. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP45

Bosch EDC17CP45 original files

The Bosch EDC17CP45 unit page