Original file

Mercedes-Benz CLS350 Bosch EDC17CP46 0064467140 / 0064467140

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz CLS350, hardware number 0064467140 and software number 0064467140, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLS3503.0 diesel · 265.0PS / 194.9kW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0064467140
Software number
0064467140
Bosch part / software
10SW030903
Software / calibration
6429024003

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLS350
Engine3.0 diesel
Power265.0PS / 194.9kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number0064467140
Software number0064467140
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key222d6070f4eb6387
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW030903Offset in the file: 0x04001A
Software / calibration6429024003Offset in the file: 0x0776FF
Data set number6429039113Offset in the file: 0x07770A
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_7EL0__CV184000///Offset in the file: 0x041080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0064467140 and software number 0064467140. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
10SW009552Mercedes-Benz Sprinter 2016y 319CDI
10SW014397Mercedes-Benz
10SW070345Mercedes-Benz Sprinter
0064467140Mercedes-Benz ML350
00644671401037512404Mercedes-Benz E 350 2011 Turbo
00644671401037512448Mercedes-Benz R300
00644671401037512495Mercedes-Benz cls 350 2010 194.9KWKW
01044829400104482940Mercedes-Benz E350

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page