Original file

Jaguar XE Bosch MEDC17.9 GX73-12K532-FAD / 10SW001037

An original (stock) flash read of the Bosch MEDC17.9 control unit, fitted in Jaguar XE, hardware number GX73-12K532-FAD and software number 10SW001037, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XE2.0 diesel 180PS
Control unit
Bosch MEDC17.9
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GX73-12K532-FAD
Software number
10SW001037

Technical data

Vehicle
BrandJaguar
Car modelXE
Engine2.0 diesel 180PS
Power180.0PS / 132.4kW
Control unit
Control unitBosch MEDC17.9
ECU makerBosch
Hardware numberGX73-12K532-FAD
Software number10SW001037
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyccf98d294f1fc01f
Identification read from the file
ECU nameMEDC17.9
Read typeCalibration only (data set)
Bosch part / software10SW001037Offset in the file: 0x02001A
Bosch project identifier (EPK)42/1/MEDC17_9/190/P1226//P1226C083_3_20///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEDC17.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GX73-12K532-FAD and software number 10SW001037. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEDC17.9

HardwareSoftwareVehicles
GX73-12B684-FABHX73-14C204-FFELand Rover Range Rover Evoque, Land Rover E-Pace, Jaguar
GX73-12B684-FABHX73-14C204-FJCLand Rover Range Rover Evoque, Land Rover Discovery
GX73-12B684-FABJ9C3-12K532-KDEJaguar E-Pace
GX73-12B684-FBB10SW010927Jaguar F-Pace, Jaguar XF
GX73-12K532-FAE10SW004432Jaguar XE
GX73-12K532-FAFGX73-12K532-FAFJaguar XE
GX73-12K532-FAG10SW023549Jaguar XE
GX73-12K532-FCCGX73-12K532-FCCJaguar XE

Bosch MEDC17.9 original files

The Bosch MEDC17.9 unit page