Original file
Mercedes-Benz E350 Bosch EDC17CP57 CR61-GDB1-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME07 / 1037551905
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E350, hardware number CR61-GDB1-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME07 and software number 1037551905, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E350OM642 · 258.0PS / 189.8kW
- Control unit
- Bosch EDC17CP57
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR61-GDB1-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME07
- Software number
- 1037551905
- Software / calibration
- 6429023602
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E350 |
| Engine | OM642 |
| Fuel | Diesel |
| Displacement | 3.0 |
| Power | 258.0PS / 189.8kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-GDB1-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME07 |
| Software number | 1037551905 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 6a1c79fdbb39e0e4 |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037551905 | Offset in the file: 0x02001A |
| Software / calibration | 6429023602 | Offset in the file: 0x07FFB3 |
| Data set number | 6429034508 | Offset in the file: 0x07FFBE |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_GDB1__CV143700/// | Offset in the file: 0x021140 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-GDB1-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME07 and software number 1037551905. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Mercedes-Benz E | 896.00 KB | €15 | Add to cart |
| Mercedes-Benz E / E Coupe | 2,048.00 KB | €15 | Add to cart |
All reads of CR61-GDB1-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME07 / 1037551905
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-GDB1-212WA-642LS-EU6OPS_4X4_3S_NAG2-ME09 | 1037524982 | Mercedes-Benz E350 |
| CR61-GDB1-212WA-642LS-EU6OPS_4X4_3S_NAG2-ME09 | 1037551903 | Mercedes-Benz E350 |
| CR61-GDB1-212WA-642LS-EU6OPS_4x4_3S_NAG2-ME09 | 1037524982 | Mercedes-Benz E350 |
| CR61-GDB1-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME07 | 1037524982 | Mercedes-Benz E |
| CR61-GDB1-212WSA-642LS-EU6OPS_4x2_3S_NAG3-ME07 | 1037551905 | Mercedes-Benz E350 TD Performannce |
| CR61-GDB1-218CA-642LS-EU6OPS_4X2_3S_NAG3-ME08 | 1037551906 | Mercedes-Benz CLS |
| CR61-GDB1-218CA-642LS-EU6OPS_4X4_3S_NAG3-ME07 | 1037551889 | Mercedes-Benz CLS |
| CR61-GDB1-218XA-642LS-EU6OPS_4X4_3S_NAG3-ME03 | 1037524982 | Mercedes-Benz CLS |