Original file

Mercedes-Benz Bosch EDC17CP57 CR61-DDB2-212SA-642LS-EU6OPS_4x4_3S-ME05 / 1037538088

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz, hardware number CR61-DDB2-212SA-642LS-EU6OPS_4x4_3S-ME05 and software number 1037538088, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-BenzOM642 · 256.0PS / 188.3kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR61-DDB2-212SA-642LS-EU6OPS_4x4_3S-ME05
Software number
1037538088
Software / calibration
6429020902

Technical data

Vehicle
BrandMercedes-Benz
EngineOM642
FuelDiesel
Displacement3.0
Power256.0PS / 188.3kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware numberCR61-DDB2-212SA-642LS-EU6OPS_4x4_3S-ME05
Software number1037538088
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya501abcc43409876
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software1037538088Offset in the file: 0x02001A
Software / calibration6429020902Offset in the file: 0x078397
Data set number6429036806Offset in the file: 0x0783A2
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_DDB2__CV132000///Offset in the file: 0x020BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR61-DDB2-212SA-642LS-EU6OPS_4x4_3S-ME05 and software number 1037538088. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz E350Flash2,048.00 KB€15Add to cart

All reads of CR61-DDB2-212SA-642LS-EU6OPS_4x4_3S-ME05 / 1037538088

Other pairs of Bosch EDC17CP57

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page