Original file

Mercedes-Benz Sprinter Bosch EDC17CP57 WDB9076531P / 10SW017688

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz Sprinter, hardware number WDB9076531P and software number 10SW017688, 4,288.02 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinterdiesel · 190.0PS / 139.7kW
Control unit
Bosch EDC17CP57
Read type
Full read (boot area included)
File
4,288.02 KB · Flash
Hardware number
WDB9076531P
Software number
10SW017688
Bosch part / software
10SW040854
Software / calibration
6429022003

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Enginediesel
Displacement3.0
Power190.0PS / 139.7kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware numberWDB9076531P
Software number10SW017688
File
File typeOriginal flash read
File size4,288.02 KB (4,390,928 bytes)
File key6f3f7df324dba44c
Identification read from the file
ECU nameEDC17CP57
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW040854Offset in the file: 0x02001A
Software / calibration6429022003Offset in the file: 0x02022F
Data set number6429030713Offset in the file: 0x283B46
Boot software6429040500Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)48/1/EDC17CP57/1/P1643//P_1643_47A1__CV182000///Offset in the file: 0x05BCC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number WDB9076531P and software number 10SW017688. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz SprinterFlash4,288.02 KB€15Add to cart

All reads of WDB9076531P / 10SW017688

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
CR61_470-53Q0-VS40-OM642LS-EU5III-ME210SW017475Mercedes-Benz X, Mercedes-Benz X-Class
CR61_470-53Q0-VS40-OM642LS-EU5III-ME210SW048837Mercedes-Benz X-Class
CR61_470-53Q0-VS40-OM642LS-EU6C-ME210SW017475Mercedes-Benz X
CR61_470-53Q0-VS40-OM642LS-EU6C-ME210SW048838Mercedes-Benz X, Mercedes-Benz X-Class
EDC17CP571037524978Mercedes-Benz Sprinter
NAG3-150KW-CH4O1037524978Mercedes-Benz Benz GLE350
W069064P6951037524978Mercedes-Benz Sprinter
WDB9076331P10SW017688Mercedes-Benz Sprinter

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page