Original file
Ford F250 Bosch EDC17C10 HC3A-14C204-BPG / 1037562158
An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford F250, hardware number HC3A-14C204-BPG and software number 1037562158, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford F2506.7 diesel 440PS
- Control unit
- Bosch EDC17C10
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- HC3A-14C204-BPG
- Software number
- 1037562158
- Vehicle maker's hardware number
- CV6Q-12A650-AA
Technical data
| Brand | Ford |
|---|---|
| Car model | F250 |
| Engine | 6.7 diesel 440PS |
| Power | 440.0PS / 323.6kW |
| Control unit | Bosch EDC17C10 |
|---|---|
| ECU maker | Bosch |
| Hardware number | HC3A-14C204-BPG |
| Software number | 1037562158 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 147e4bc359749267 |
| ECU name | EDC17CP65 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1793 | |
| Bosch part / software | 1037562158 | Offset in the file: 0x02001A |
| Vehicle maker's hardware number | CV6Q-12A650-AA | Offset in the file: 0x383891 |
| Software / calibration | HC3A-14C204-BPG | Offset in the file: 0x1FFF4B |
| Bosch project identifier (EPK) | 37/1/EDC17CP65/57/P1417//P1417_812/// | Offset in the file: 0x1F2004 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number HC3A-14C204-BPG and software number 1037562158. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C10
| Hardware | Software | Vehicles |
|---|---|---|
| FS71-14C204-FG | 1037559155 | Ford Mondeo |
| GC4A-14C558-AA | 1037556639 | Ford F650 |
| GN15-14C204-DHG | GN15-14C204-DHG | Ford EcoSport |
| HC3A-14C204-AEJ | 1037562153 | Ford F350 |
| HC3A-14C204-CEC | 10SW021869 | Ford F350 |
| HC3A-14C204-CLJ | 10SW085156 | Ford F250 |
| HC3A-14C558-AA | 1037558289 | Ford F250, Ford F550 |
| JC3A-14C204-SK | 10SW085299 | Ford F350 |