Original file

Ford F350 Bosch EDC17C10 HC3A-14C204-CEC / 10SW021869

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford F350, hardware number HC3A-14C204-CEC and software number 10SW021869, 3,968.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford F3506.7 440PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
3,968.00 KB · Flash
Hardware number
HC3A-14C204-CEC
Software number
10SW021869
Vehicle maker's hardware number
CV6Q-12A650-AA

Technical data

Vehicle
BrandFord
Car modelF350
Engine6.7 440PS
Power440PS / 323.6kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberHC3A-14C204-CEC
Software number10SW021869
File
File typeOriginal flash read
File size3,968.00 KB (4,063,232 bytes)
File key43274d0589e6cacb
Identification read from the file
ECU nameEDC17CP65
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW021869Offset in the file: 0x00001A
Vehicle maker's hardware numberCV6Q-12A650-AAOffset in the file: 0x364009
Software / calibrationHC3A-14C204-CECOffset in the file: 0x1DFF4B
Bosch project identifier (EPK)37/1/EDC17CP65/57/P1417//P1417_820///Offset in the file: 0x1D21F8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HC3A-14C204-CEC and software number 10SW021869. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page