Original file

Ford F250 Bosch EDC17C10 HC3A-14C558-AA / 1037558289

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford F250, hardware number HC3A-14C558-AA and software number 1037558289, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford F2506.7 diesel 440PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
HC3A-14C558-AA
Software number
1037558289
Bosch part / software
10SW021870
Vehicle maker's hardware number
HC3A-12A650-JC
Software / calibration
HC3A-12B684-BA

Technical data

Vehicle
BrandFord
Car modelF250
Engine6.7 diesel 440PS
Power440.0PS / 323.6kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberHC3A-14C558-AA
Software number1037558289
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9ef140428861b572
Identification read from the file
ECU nameEDC17CP65
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW021870Offset in the file: 0x02001A
Vehicle maker's hardware numberHC3A-12A650-JCOffset in the file: 0x00FD30
Software / calibrationHC3A-12B684-BAOffset in the file: 0x00FD00
Engine descriptionHC3A-14C204-CFCOffset in the file: 0x1FFF4B
Bosch project identifier (EPK)37/1/EDC17CP65/57/P1417//P1417_820///Offset in the file: 0x1F21F8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HC3A-14C558-AA and software number 1037558289. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ford F550Flash4,096.00 KB€15Add to cart
Ford F250Flash4,096.00 KB€15Add to cart

All reads of HC3A-14C558-AA / 1037558289

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page