Original file

Mercedes-Benz CLS Bosch MD1CP001 6569010900 / 10SW029845

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz CLS, hardware number 6569010900 and software number 10SW029845, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLS3.0 diesel 249PS
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
6569010900
Software number
10SW029845

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLS
Engine3.0 diesel 249PS
Power249.0PS / 183.1kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6569010900
Software number10SW029845
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyaa8b6e5891f6b700
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW029845Offset in the file: 0x000144
Data set number6569035300Offset in the file: 0x10BCDF
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_9050D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6569010900 and software number 10SW029845. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
65690102006569032501Mercedes-Benz GLE400d 3.0d
65690102006569034900Mercedes-Benz G 350d
656901090010SW024217Mercedes-Benz S350D
656901090010SW029531Mercedes-Benz S
656901090010SW035338Mercedes-Benz S350
656901090010SW044692Mercedes-Benz GLE
656901090010SW044693Mercedes-Benz GLE-Class
656901090010SW050993Mercedes-Benz GLC

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page