Original file

Mercedes-Benz S350 Bosch MD1CP001 6569010900 / 10SW035338

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz S350, hardware number 6569010900 and software number 10SW035338, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz S3503.0 diesel · 452KW
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
6569010900
Software number
10SW035338

Technical data

Vehicle
BrandMercedes-Benz
Car modelS350
Engine3.0 diesel
Power452KW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6569010900
Software number10SW035338
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key40aaa241a0adbae5
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW035338Offset in the file: 0x000144
Data set number6569036400Offset in the file: 0x110697
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A060D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6569010900 and software number 10SW035338. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
65690102006569034900Mercedes-Benz G 350d
656901090010SW024217Mercedes-Benz S350D
656901090010SW029531Mercedes-Benz S
656901090010SW029845Mercedes-Benz CLS
656901090010SW044692Mercedes-Benz GLE
656901090010SW044693Mercedes-Benz GLE-Class
656901090010SW050993Mercedes-Benz GLC
656901090010SW054913Mercedes-Benz GLE

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page