Original file

Mercedes-Benz C-Class Coupe Bosch MD1CP001 6549011600 / 10SW046217

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz C-Class Coupe, hardware number 6549011600 and software number 10SW046217, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C-Class Coupediesel 194PS
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
6549011600
Software number
10SW046217

Technical data

Vehicle
BrandMercedes-Benz
Car modelC-Class Coupe
Enginediesel 194PS
Displacement1.9
Power194.4PS / 143.0kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6549011600
Software number10SW046217
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb6c01246e0733828
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW046217Offset in the file: 0x000144
Data set number6549030504Offset in the file: 0x11908F
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B070D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6549011600 and software number 10SW046217. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
654901160010SW032157Mercedes-Benz W205
654901160010SW033448Mercedes-Benz C220
654901160010SW034574Mercedes-Benz E
654901160010SW046212Mercedes-Benz GLC
654901160010SW047385Mercedes-Benz C
654901160010SW047386Mercedes-Benz C220
654901160010SW068286Mercedes-Benz GLC
654901160010SW068289Mercedes-Benz GLC

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page