Original file

Mercedes-Benz E / E Coupe Bosch MD1CP001 6569010200 / 10SW047167

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E / E Coupe, hardware number 6569010200 and software number 10SW047167, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E / E Coupe4.0 diesel 340PS
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
6569010200
Software number
10SW047167

Technical data

Vehicle
BrandMercedes-Benz
Car modelE / E Coupe
Engine4.0 diesel 340PS
Power340.0PS / 250.0kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6569010200
Software number10SW047167
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key1fc614f125a18a39
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW047167Offset in the file: 0x000144
Data set number6569031801Offset in the file: 0x110697
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A060D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6569010200 and software number 10SW047167. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
65490277006549038007Mercedes-Benz GLC 300de
656901020010SW047157Mercedes-Benz GLS
656901020010SW047163Mercedes-Benz E-Class
656901020010SW047164Mercedes-Benz CLS
656901020010SW054362Mercedes-Benz G
65690102006569031200Mercedes-Benz G 400d
65690102006569031800Mercedes-Benz G 350d
65690102006569031901Mercedes-Benz CLS 350 D

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page