Original file

Mercedes-Benz C Bosch MD1CP001 6549011600 / 10SW047385

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz C, hardware number 6549011600 and software number 10SW047385, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C2.0 diesel 194PS
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
6549011600
Software number
10SW047385

Technical data

Vehicle
BrandMercedes-Benz
Car modelC
Engine2.0 diesel 194PS
Power194.0PS / 142.7kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6549011600
Software number10SW047385
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key0e353ea9657e82ae
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW047385Offset in the file: 0x000144
Data set number6549031904Offset in the file: 0x11054F
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A050D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6549011600 and software number 10SW047385. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
654901160010SW033448Mercedes-Benz C220
654901160010SW034574Mercedes-Benz E
654901160010SW046212Mercedes-Benz GLC
654901160010SW046217Mercedes-Benz C-Class Coupe
654901160010SW047386Mercedes-Benz C220
654901160010SW068286Mercedes-Benz GLC
654901160010SW068289Mercedes-Benz GLC
65490116006549021800Mercedes-Benz E220d 2.0d

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page