Original file

Mercedes-Benz GLE Bosch MD1CP001 6569010900 / 10SW054913

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLE, hardware number 6569010900 and software number 10SW054913, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLEdiesel 330PS
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
6569010900
Software number
10SW054913

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLE
Enginediesel 330PS
Displacement3.0
Power330.0PS / 242.7kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6569010900
Software number10SW054913
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyddd0d678734da09f
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW054913Offset in the file: 0x000144
Data set number6569034101Offset in the file: 0x119297
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B082D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6569010900 and software number 10SW054913. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
656901090010SW035338Mercedes-Benz S350
656901090010SW044692Mercedes-Benz GLE
656901090010SW044693Mercedes-Benz GLE-Class
656901090010SW050993Mercedes-Benz GLC
65690109006569035100Mercedes-Benz CLS 350d
65690109006569036500Mercedes-Benz S 300d
656901150010SW087006Mercedes-Benz S
656901150010SW088136Mercedes-Benz

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page