Original file

Mercedes-Benz GLC Bosch MD1CP001 6549011600 / 10SW068286

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLC, hardware number 6549011600 and software number 10SW068286, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC1.9 diesel 163PS
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
6549011600
Software number
10SW068286

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC
Engine1.9 diesel 163PS
Power163.0PS / 119.9kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6549011600
Software number10SW068286
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyab867f0fb7aee0c5
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW068286Offset in the file: 0x000144
Data set number6549039805Offset in the file: 0x119297
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B082D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6549011600 and software number 10SW068286. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
654901160010SW046212Mercedes-Benz GLC
654901160010SW046217Mercedes-Benz C-Class Coupe
654901160010SW047385Mercedes-Benz C
654901160010SW047386Mercedes-Benz C220
654901160010SW068289Mercedes-Benz GLC
65490116006549021800Mercedes-Benz E220d 2.0d
65490116006549032204Mercedes-Benz E 200 D
65490116006549032304Mercedes-Benz E220 2.0d

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page