Original file

Mercedes-Benz E Bosch MD1CP001 6549016200 / 10SW088788

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E, hardware number 6549016200 and software number 10SW088788, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E2.0 diesel 194PS
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
6549016200
Software number
10SW088788

Technical data

Vehicle
BrandMercedes-Benz
Car modelE
Engine2.0 diesel 194PS
Power194.0PS / 142.7kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6549016200
Software number10SW088788
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5f12af7f6ce0ae59
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW088788Offset in the file: 0x000144
Data set number6549034512Offset in the file: 0x1107EB
Bosch project identifier (EPK)246/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A090D///Offset in the file: 0x17FA7B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6549016200 and software number 10SW088788. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
654901260010SW049369Mercedes-Benz C
654901260010SW062840Mercedes-Benz E
654901620010SW087326Mercedes-Benz
654901620010SW088785Mercedes-Benz Unknown Unknown
65490162006549032112Mercedes-Benz CLS 220 D
65490162006549032712Mercedes-Benz E 200d (2.0)
65490162006549033112Mercedes-Benz E 220 D
65490162006549034412Mercedes-Benz E 220 D

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page